Add 
Twin Drive Trackless Bi Folding Swing Gate Hardware Set
FREE UP EXTRA SPACE
A traditional type swing gate uses up to 100% more backspace in its opening and closing if compared with bi-folding swing gates. Meaning that the normal space taken up by a conventional swing gate will be free to utilize in some other way. The MR. TECH TWIN DRIVE bi-folding hardware is particularly useful in places where space is at a premium such as urban areas with high population density. The traditional swinging gate will take up valuable space and can be quite inconvenient to use at times. Using the MR. TECH TWIN DRIVE bi-folding system will free up more space for vehicles or foot traffic.
The bi-fold gate hardware is useful where space is limited for a double or single-leaf swing gate. This is the solution if you are looking to automate your bi-fold gate tracklessly. Suitable for lightweight gates up to 110kg and 3m clear openings. Can be used with any standard swing gate operator.
Product Details:
| Hinge | Type Swing |
| Brand | MR. TECH |
| Model Number | MR TBKD6M, MR TBKS3M |
| Material | Mild Steel GI coding |
| Usage/Application | Automate Bi fold gate trackless |
| Weight | Capacity – Upto 110 Kg to 280kg / 6m-3 m leaf |
| Finishing | 270g/m2 Hot Dipped Galvanized |
| Product Code | Trackless Bi Folding Swing Gate Hardware Set |
Trackless Bi folding Swing gate Hardware Installation
ALL IN ONE BOX CONCEPT THE INSTALLATION STEPS
The installation does not require complicated steps and materials. No welding is required, and therefore the working time is not too long as well. We invite you to follow the below installation steps.
OTHER BENEFITS OF BI-FOLDING HARDWARE SINGLE LEAF TWIN DRIVE
Single Leaf Bi-Folding solution TWIN DRIVE Trackless Bi-Folding Swing Gate Hardware Set is an ideal solution where side entrance access is required. It is designed to allow a vehicle user full maneuverability around a property. Compared to a double swing gate, a single Bi-Folding Gate will be less expensive to automate since it requires only one gate operator instead of two.
It is a perfect solution for the entrance with a gravel surface, taking into account that you do not need to lay down the rails and cables for the second gate opener. There‘s no doubt that Bi-Folding Gates is a money and space-saving alternative that is convenient and can be very stylish.
EXTREMELY QUIET
In the past Swing Bi-Folding gates were originally very noisy. Older versions use steel rails and wheels which can be very noisy when compared with New MR. TECH TWIN DRIVE Trackless Bi-Folding System
RELIABLE
Another problem that occurred with older Swing Bi-Folding gates was leaves that jumped the rails when the wind was blowing heavily. With the MR. TECH TWIN DRIVE Trackless Bi-Folding System, this can never happen.
NOT FOR USE EVERYWHERE
There is one drawback with this type of bi-folding swing gate in that they can‘t be used everywhere. They need to have a special frame so a few factors need to be taken into account such as cross-bracing. The reason why cross-bracing is fundamental is primarily to keep the leaf from sagging.
A compression cross-brace takes weight from the top bar and transfers it by pushing down against the bottom hinge, or a vertical component or post, which transfers load to both hinges. Improper or missing cross-bracing will cause the Vertical deflection of the leaf. Cross-bracing should always “lean into opening”. Furthermore, the bi-folding swing gate only works properly when the internal hinges are properly welded with respect to the vertical axel. You‘ll also need to think about the wiring of safety edges, as this type of feature should be accommodated in the frame.
Reviews
Clear filtersThere are no reviews yet.